StdlibSourceThe OCaml Standard library.
This module is automatically opened at the beginning of each compilation. All components of this module can therefore be referred by their short name, without prefixing them by Stdlib.
In particular, it provides the basic operations over the built-in types (numbers, booleans, byte sequences, strings, exceptions, references, lists, arrays, input-output channels, ...) and the standard library modules.
Raise the given exception value
A faster version raise which does not record the backtrace.
Raise exception Invalid_argument with the given string.
Raise exception Failure with the given string.
The Exit exception is not raised by any library function. It is provided for use in your programs.
Exception raised when none of the cases of a pattern-matching apply. The arguments are the location of the match keyword in the source code (file name, line number, column number).
Exception raised when an assertion fails. The arguments are the location of the assert keyword in the source code (file name, line number, column number).
Exception raised by library functions to signal that the given arguments do not make sense. The string gives some information to the programmer. As a general rule, this exception should not be caught, it denotes a programming error and the code should be modified not to trigger it.
Exception raised by library functions to signal that they are undefined on the given arguments. The string is meant to give some information to the programmer; you must not pattern match on the string literal because it may change in future versions (use Failure _ instead).
Exception raised by search functions when the desired object could not be found.
Exception raised by the garbage collector when there is insufficient memory to complete the computation. (Not reliable for allocations on the minor heap.)
Exception raised by the bytecode interpreter when the evaluation stack reaches its maximal size. This often indicates infinite or excessively deep recursion in the user's program.
Before 4.10, it was not fully implemented by the native-code compiler.
Exception raised by the input/output functions to report an operating system error. The string is meant to give some information to the programmer; you must not pattern match on the string literal because it may change in future versions (use Sys_error _ instead).
Exception raised by input functions to signal that the end of file has been reached.
Exception raised by integer division and remainder operations when their second argument is zero.
A special case of Sys_error raised when no I/O is possible on a non-blocking I/O channel.
Exception raised when an ill-founded recursive module definition is evaluated. The arguments are the location of the definition in the source code (file name, line number, column number).
e1 = e2 tests for structural equality of e1 and e2. Mutable structures (e.g. references and arrays) are equal if and only if their current contents are structurally equal, even if the two mutable objects are not the same physical object. Equality between functional values raises Invalid_argument. Equality between cyclic data structures may not terminate. Left-associative operator, see Ocaml_operators for more information.
Negation of Stdlib.(=). Left-associative operator, see Ocaml_operators for more information.
See Stdlib.(>=). Left-associative operator, see Ocaml_operators for more information.
See Stdlib.(>=). Left-associative operator, see Ocaml_operators for more information.
See Stdlib.(>=). Left-associative operator, see Ocaml_operators for more information.
Structural ordering functions. These functions coincide with the usual orderings over integers, characters, strings, byte sequences and floating-point numbers, and extend them to a total ordering over all types. The ordering is compatible with ( = ). As in the case of ( = ), mutable structures are compared by contents. Comparison between functional values raises Invalid_argument. Comparison between cyclic structures may not terminate. Left-associative operator, see Ocaml_operators for more information.
compare x y returns 0 if x is equal to y, a negative integer if x is less than y, and a positive integer if x is greater than y. The ordering implemented by compare is compatible with the comparison predicates =, < and > defined above, with one difference on the treatment of the float value Stdlib.nan. Namely, the comparison predicates treat nan as different from any other float value, including itself; while compare treats nan as equal to itself and less than any other float value. This treatment of nan ensures that compare defines a total ordering relation.
compare applied to functional values may raise Invalid_argument. compare applied to cyclic structures may not terminate.
The compare function can be used as the comparison function required by the Set.Make and Map.Make functors, as well as the List.sort and Array.sort functions.
Return the smaller of the two arguments. The result is unspecified if one of the arguments contains the float value nan.
Return the greater of the two arguments. The result is unspecified if one of the arguments contains the float value nan.
e1 == e2 tests for physical equality of e1 and e2. On mutable types such as references, arrays, byte sequences, records with mutable fields and objects with mutable instance variables, e1 == e2 is true if and only if physical modification of e1 also affects e2. On non-mutable types, the behavior of ( == ) is implementation-dependent; however, it is guaranteed that e1 == e2 implies compare e1 e2 = 0. Left-associative operator, see Ocaml_operators for more information.
Negation of Stdlib.(==). Left-associative operator, see Ocaml_operators for more information.
The boolean negation.
The boolean 'and'. Evaluation is sequential, left-to-right: in e1 && e2, e1 is evaluated first, and if it returns false, e2 is not evaluated at all. Right-associative operator, see Ocaml_operators for more information.
The boolean 'or'. Evaluation is sequential, left-to-right: in e1 || e2, e1 is evaluated first, and if it returns true, e2 is not evaluated at all. Right-associative operator, see Ocaml_operators for more information.
__LOC__ returns the location at which this expression appears in the file currently being parsed by the compiler, with the standard error format of OCaml: "File %S, line %d, characters %d-%d".
__FILE__ returns the name of the file currently being parsed by the compiler.
__LINE__ returns the line number at which this expression appears in the file currently being parsed by the compiler.
__MODULE__ returns the module name of the file being parsed by the compiler.
__POS__ returns a tuple (file,lnum,cnum,enum), corresponding to the location at which this expression appears in the file currently being parsed by the compiler. file is the current filename, lnum the line number, cnum the character position in the line and enum the last character position in the line.
__FUNCTION__ returns the name of the current function or method, including any enclosing modules or classes.
__LOC_OF__ expr returns a pair (loc, expr) where loc is the location of expr in the file currently being parsed by the compiler, with the standard error format of OCaml: "File %S, line %d, characters %d-%d".
__LINE_OF__ expr returns a pair (line, expr), where line is the line number at which the expression expr appears in the file currently being parsed by the compiler.
__POS_OF__ expr returns a pair (loc,expr), where loc is a tuple (file,lnum,cnum,enum) corresponding to the location at which the expression expr appears in the file currently being parsed by the compiler. file is the current filename, lnum the line number, cnum the character position in the line and enum the last character position in the line.
Reverse-application operator: x |> f |> g is exactly equivalent to g (f (x)). Left-associative operator, see Ocaml_operators for more information.
Application operator: g @@ f @@ x is exactly equivalent to g (f (x)). Right-associative operator, see Ocaml_operators for more information.
Integers are Sys.int_size bits wide. All operations are taken modulo 2Sys.int_size. They do not fail on overflow.
Unary negation. You can also write - e instead of ~- e. Unary operator, see Ocaml_operators for more information.
Unary addition. You can also write + e instead of ~+ e. Unary operator, see Ocaml_operators for more information.
succ x is x + 1.
pred x is x - 1.
Integer addition. Left-associative operator, see Ocaml_operators for more information.
Integer subtraction. Left-associative operator, , see Ocaml_operators for more information.
Integer multiplication. Left-associative operator, see Ocaml_operators for more information.
Integer division. Integer division rounds the real quotient of its arguments towards zero. More precisely, if x >= 0 and y > 0, x / y is the greatest integer less than or equal to the real quotient of x by y. Moreover, (- x) / y = x / (- y) = - (x / y). Left-associative operator, see Ocaml_operators for more information.
Integer remainder. If y is not zero, the result of x mod y satisfies the following properties: x = (x / y) * y + x mod y and abs(x mod y) <= abs(y) - 1. If y = 0, x mod y raises Division_by_zero. Note that x mod y is negative only if x < 0. Left-associative operator, see Ocaml_operators for more information.
abs x is the absolute value of x. On min_int this is min_int itself and thus remains negative.
The greatest representable integer.
The smallest representable integer.
Bitwise logical and. Left-associative operator, see Ocaml_operators for more information.
Bitwise logical or. Left-associative operator, see Ocaml_operators for more information.
Bitwise logical exclusive or. Left-associative operator, see Ocaml_operators for more information.
Bitwise logical negation.
n lsl m shifts n to the left by m bits. The result is unspecified if m < 0 or m > Sys.int_size. Right-associative operator, see Ocaml_operators for more information.
n lsr m shifts n to the right by m bits. This is a logical shift: zeroes are inserted regardless of the sign of n. The result is unspecified if m < 0 or m > Sys.int_size. Right-associative operator, see Ocaml_operators for more information.
n asr m shifts n to the right by m bits. This is an arithmetic shift: the sign bit of n is replicated. The result is unspecified if m < 0 or m > Sys.int_size. Right-associative operator, see Ocaml_operators for more information.
OCaml's floating-point numbers follow the IEEE 754 standard, using double precision (64 bits) numbers. Floating-point operations never raise an exception on overflow, underflow, division by zero, etc. Instead, special IEEE numbers are returned as appropriate, such as infinity for 1.0 /. 0.0, neg_infinity for -1.0 /. 0.0, and nan ('not a number') for 0.0 /. 0.0. These special numbers then propagate through floating-point computations as expected: for instance, 1.0 /. infinity is 0.0, basic arithmetic operations (+., -., *., /.) with nan as an argument return nan, ...
Unary negation. You can also write -. e instead of ~-. e. Unary operator, see Ocaml_operators for more information.
Unary addition. You can also write +. e instead of ~+. e. Unary operator, see Ocaml_operators for more information.
Floating-point addition. Left-associative operator, see Ocaml_operators for more information.
Floating-point subtraction. Left-associative operator, see Ocaml_operators for more information.
Floating-point multiplication. Left-associative operator, see Ocaml_operators for more information.
Floating-point division. Left-associative operator, see Ocaml_operators for more information.
Exponentiation. Right-associative operator, see Ocaml_operators for more information.
Square root.
Exponential.
Natural logarithm.
Base 10 logarithm.
expm1 x computes exp x -. 1.0, giving numerically-accurate results even if x is close to 0.0.
log1p x computes log(1.0 +. x) (natural logarithm), giving numerically-accurate results even if x is close to 0.0.
Cosine. Argument is in radians.
Sine. Argument is in radians.
Tangent. Argument is in radians.
Arc cosine. The argument must fall within the range [-1.0, 1.0]. Result is in radians and is between 0.0 and pi.
Arc sine. The argument must fall within the range [-1.0, 1.0]. Result is in radians and is between -pi/2 and pi/2.
Arc tangent. Result is in radians and is between -pi/2 and pi/2.
atan2 y x returns the arc tangent of y /. x. The signs of x and y are used to determine the quadrant of the result. Result is in radians and is between -pi and pi.
hypot x y returns sqrt(x *. x + y *. y), that is, the length of the hypotenuse of a right-angled triangle with sides of length x and y, or, equivalently, the distance of the point (x,y) to origin. If one of x or y is infinite, returns infinity even if the other is nan.
Hyperbolic cosine. Argument is in radians.
Hyperbolic sine. Argument is in radians.
Hyperbolic tangent. Argument is in radians.
Hyperbolic arc cosine. The argument must fall within the range [1.0, inf]. Result is in radians and is between 0.0 and inf.
Hyperbolic arc sine. The argument and result range over the entire real line. Result is in radians.
Hyperbolic arc tangent. The argument must fall within the range [-1.0, 1.0]. Result is in radians and ranges over the entire real line.
Round above to an integer value. ceil f returns the least integer value greater than or equal to f. The result is returned as a float.
Round below to an integer value. floor f returns the greatest integer value less than or equal to f. The result is returned as a float.
abs_float f returns the absolute value of f.
copysign x y returns a float whose absolute value is that of x and whose sign is that of y. If x is nan, returns nan. If y is nan, returns either x or -. x, but it is not specified which.
mod_float a b returns the remainder of a with respect to b. The returned value is a -. n *. b, where n is the quotient a /. b rounded towards zero to an integer.
frexp f returns the pair of the significant and the exponent of f. When f is zero, the significant x and the exponent n of f are equal to zero. When f is non-zero, they are defined by f = x *. 2 ** n and 0.5 <= x < 1.0.
ldexp x n returns x *. 2 ** n.
modf f returns the pair of the fractional and integral part of f.
Same as Stdlib.float_of_int.
Convert an integer to floating-point.
Same as Stdlib.int_of_float.
Truncate the given floating-point number to an integer. The result is unspecified if the argument is nan or falls outside the range of representable integers.
Positive infinity.
Negative infinity.
A special floating-point value denoting the result of an undefined operation such as 0.0 /. 0.0. Stands for 'not a number'. Any floating-point operation with nan as argument returns nan as result, unless otherwise specified in IEEE 754 standard. As for floating-point comparisons, =, <, <=, > and >= return false and <> returns true if one or both of their arguments is nan.
nan is a quiet NaN since 5.1; it was a signaling NaN before.
The largest positive finite value of type float.
The smallest positive, non-zero, non-denormalized value of type float.
The difference between 1.0 and the smallest exactly representable floating-point number greater than 1.0.
The five classes of floating-point numbers, as determined by the Stdlib.classify_float function.
Return the class of the given floating-point number: normal, subnormal, zero, infinite, or not a number.
More string operations are provided in module String.
String concatenation. Right-associative operator, see Ocaml_operators for more information.
More character operations are provided in module Char.
Return the ASCII code of the argument.
Return the character with the given ASCII code.
Discard the value of its argument and return (). For instance, ignore(f x) discards the result of the side-effecting function f. It is equivalent to f x; (), except that the latter may generate a compiler warning; writing ignore(f x) instead avoids the warning.
Return the string representation of a boolean. As the returned values may be shared, the user should not modify them directly.
Convert the given string to a boolean.
Return None if the string is not "true" or "false".
Same as Stdlib.bool_of_string_opt, but raise Invalid_argument "bool_of_string" instead of returning None.
Return the string representation of an integer, in decimal.
Convert the given string to an integer. The string is read in decimal (by default, or if the string begins with 0u), in hexadecimal (if it begins with 0x or 0X), in octal (if it begins with 0o or 0O), or in binary (if it begins with 0b or 0B).
The 0u prefix reads the input as an unsigned integer in the range [0, 2*max_int+1]. If the input exceeds max_int it is converted to the signed integer min_int + input - max_int - 1.
The _ (underscore) character can appear anywhere in the string and is ignored.
Return None if the given string is not a valid representation of an integer, or if the integer represented exceeds the range of integers representable in type int.
Same as Stdlib.int_of_string_opt, but raise Failure "int_of_string" instead of returning None.
Return a string representation of a floating-point number.
This conversion can involve a loss of precision. For greater control over the manner in which the number is printed, see Printf.
Convert the given string to a float. The string is read in decimal (by default) or in hexadecimal (marked by 0x or 0X).
The format of decimal floating-point numbers is [-] dd.ddd (e|E) [+|-] dd , where d stands for a decimal digit.
The format of hexadecimal floating-point numbers is [-] 0(x|X) hh.hhh (p|P) [+|-] dd , where h stands for an hexadecimal digit and d for a decimal digit.
In both cases, at least one of the integer and fractional parts must be given; the exponent part is optional.
The _ (underscore) character can appear anywhere in the string and is ignored.
Depending on the execution platforms, other representations of floating-point numbers can be accepted, but should not be relied upon.
Return None if the given string is not a valid representation of a float.
Same as Stdlib.float_of_string_opt, but raise Failure "float_of_string" instead of returning None.
Return the first component of a pair.
Return the second component of a pair.
More list operations are provided in module List.
l0 @ l1 appends l1 to l0. Same function as List.append. Right-associative operator, see Ocaml_operators for more information.
Note: all input/output functions can raise Sys_error when the system calls they invoke fail.
The type of input channel.
The type of output channel.
The standard input for the process.
The standard output for the process.
The standard error output for the process.
Print a character on standard output.
Print a string on standard output.
Print a byte sequence on standard output.
Print an integer, in decimal, on standard output.
Print a floating-point number, in decimal, on standard output.
The conversion of the number to a string uses string_of_float and can involve a loss of precision.
Print a string, followed by a newline character, on standard output and flush standard output.
Print a newline character on standard output, and flush standard output. This can be used to simulate line buffering of standard output.
Print a character on standard error.
Print a string on standard error.
Print a byte sequence on standard error.
Print an integer, in decimal, on standard error.
Print a floating-point number, in decimal, on standard error.
The conversion of the number to a string uses string_of_float and can involve a loss of precision.
Print a string, followed by a newline character on standard error and flush standard error.
Print a newline character on standard error, and flush standard error.
Flush standard output, then read characters from standard input until a newline character is encountered.
Return the string of all characters read, without the newline character at the end.
Flush standard output, then read one line from standard input and convert it to an integer.
Return None if the line read is not a valid representation of an integer.
Same as Stdlib.read_int_opt, but raise Failure "int_of_string" instead of returning None.
Flush standard output, then read one line from standard input and convert it to a floating-point number.
Return None if the line read is not a valid representation of a floating-point number.
Same as Stdlib.read_float_opt, but raise Failure "float_of_string" instead of returning None.
type open_flag = | Open_rdonlyopen for reading.
*)| Open_wronlyopen for writing.
*)| Open_appendopen for appending: always write at end of file.
*)| Open_creatcreate the file if it does not exist.
*)| Open_truncempty the file if it already exists.
*)| Open_exclfail if Open_creat and the file already exists.
*)| Open_binaryopen in binary mode (no conversion).
*)| Open_textopen in text mode (may perform conversions).
*)| Open_nonblockopen in non-blocking mode.
*)Opening modes for Stdlib.open_out_gen and Stdlib.open_in_gen.
Open the named file for writing, and return a new output channel on that file, positioned at the beginning of the file. The file is truncated to zero length if it already exists. It is created if it does not already exists.
Same as Stdlib.open_out, but the file is opened in binary mode, so that no translation takes place during writes. On operating systems that do not distinguish between text mode and binary mode, this function behaves like Stdlib.open_out.
open_out_gen mode perm filename opens the named file for writing, as described above. The extra argument mode specifies the opening mode. The extra argument perm specifies the file permissions, in case the file must be created. Stdlib.open_out and Stdlib.open_out_bin are special cases of this function.
Flush the buffer associated with the given output channel, performing all pending writes on that channel. Interactive programs must be careful about flushing standard output and standard error at the right time.
Flush all open output channels; ignore errors.
Write the character on the given output channel.
Write the string on the given output channel.
Write the byte sequence on the given output channel.
output oc buf pos len writes len characters from byte sequence buf, starting at offset pos, to the given output channel oc.
Same as output but take a string as argument instead of a byte sequence.
Write one 8-bit integer (as the single character with that code) on the given output channel. The given integer is taken modulo 256.
Write one integer in binary format (4 bytes, big-endian) on the given output channel. The given integer is taken modulo 232. The only reliable way to read it back is through the Stdlib.input_binary_int function. The format is compatible across all machines for a given version of OCaml.
Write the representation of a structured value of any type to a channel. Circularities and sharing inside the value are detected and preserved. The object can be read back, by the function Stdlib.input_value. See the description of module Marshal for more information. Stdlib.output_value is equivalent to Marshal.to_channel with an empty list of flags.
seek_out chan pos sets the current writing position to pos for channel chan. This works only for regular files. On files of other kinds (such as terminals, pipes and sockets), the behavior is unspecified.
Return the current writing position for the given channel. Does not work on channels opened with the Open_append flag (returns unspecified results). For files opened in text mode under Windows, the returned position is approximate (owing to end-of-line conversion); in particular, saving the current position with pos_out, then going back to this position using seek_out will not work. For this programming idiom to work reliably and portably, the file must be opened in binary mode.
Return the size (number of characters) of the regular file on which the given channel is opened. If the channel is opened on a file that is not a regular file, the result is meaningless.
Close the given channel, flushing all buffered write operations. Output functions raise a Sys_error exception when they are applied to a closed output channel, except close_out and flush, which do nothing when applied to an already closed channel. Note that close_out may raise Sys_error if the operating system signals an error when flushing or closing.
Same as close_out, but ignore all errors.
set_binary_mode_out oc true sets the channel oc to binary mode: no translations take place during output. set_binary_mode_out oc false sets the channel oc to text mode: depending on the operating system, some translations may take place during output. For instance, under Windows, end-of-lines will be translated from \n to \r\n. This function has no effect under operating systems that do not distinguish between text mode and binary mode.
Open the named file for reading, and return a new input channel on that file, positioned at the beginning of the file.
Same as Stdlib.open_in, but the file is opened in binary mode, so that no translation takes place during reads. On operating systems that do not distinguish between text mode and binary mode, this function behaves like Stdlib.open_in.
open_in_gen mode perm filename opens the named file for reading, as described above. The extra arguments mode and perm specify the opening mode and file permissions. Stdlib.open_in and Stdlib.open_in_bin are special cases of this function.
Read one character from the given input channel.
Read characters from the given input channel, until a newline character is encountered. Return the string of all characters read, without the newline character at the end.
input ic buf pos len reads up to len characters from the given channel ic, storing them in byte sequence buf, starting at character number pos. It returns the actual number of characters read, between 0 and len (inclusive). A return value of 0 means that the end of file was reached. A return value between 0 and len exclusive means that not all requested len characters were read, either because no more characters were available at that time, or because the implementation found it convenient to do a partial read; input must be called again to read the remaining characters, if desired. (See also Stdlib.really_input for reading exactly len characters.) Exception Invalid_argument "input" is raised if pos and len do not designate a valid range of buf.
really_input ic buf pos len reads len characters from channel ic, storing them in byte sequence buf, starting at character number pos.
really_input_string ic len reads len characters from channel ic and returns them in a new string.
Same as Stdlib.input_char, but return the 8-bit integer representing the character.
Read an integer encoded in binary format (4 bytes, big-endian) from the given input channel. See Stdlib.output_binary_int.
Read the representation of a structured value, as produced by Stdlib.output_value, and return the corresponding value. This function is identical to Marshal.from_channel; see the description of module Marshal for more information, in particular concerning the lack of type safety.
seek_in chan pos sets the current reading position to pos for channel chan. This works only for regular files. On files of other kinds, the behavior is unspecified.
Return the current reading position for the given channel. For files opened in text mode under Windows, the returned position is approximate (owing to end-of-line conversion); in particular, saving the current position with pos_in, then going back to this position using seek_in will not work. For this programming idiom to work reliably and portably, the file must be opened in binary mode.
Return the size (number of characters) of the regular file on which the given channel is opened. If the channel is opened on a file that is not a regular file, the result is meaningless. The returned size does not take into account the end-of-line translations that can be performed when reading from a channel opened in text mode.
Close the given channel. Input functions raise a Sys_error exception when they are applied to a closed input channel, except close_in, which does nothing when applied to an already closed channel.
Same as close_in, but ignore all errors.
set_binary_mode_in ic true sets the channel ic to binary mode: no translations take place during input. set_binary_mode_out ic false sets the channel ic to text mode: depending on the operating system, some translations may take place during input. For instance, under Windows, end-of-lines will be translated from \r\n to \n. This function has no effect under operating systems that do not distinguish between text mode and binary mode.
Operations on large files. This sub-module provides 64-bit variants of the channel functions that manipulate file positions and file sizes. By representing positions and sizes by 64-bit integers (type int64) instead of regular integers (type int), these alternate functions allow operating on files whose sizes are greater than max_int.
The type of references (mutable indirection cells) containing a value of type 'a.
!r returns the current contents of reference r. Equivalent to fun r -> r.contents. Unary operator, see Ocaml_operators for more information.
r := a stores the value of a in reference r. Equivalent to fun r v -> r.contents <- v. Right-associative operator, see Ocaml_operators for more information.
Increment the integer contained in the given reference. Equivalent to fun r -> r := succ !r.
Decrement the integer contained in the given reference. Equivalent to fun r -> r := pred !r.
Format strings are character strings with special lexical conventions that defines the functionality of formatted input/output functions. Format strings are used to read data with formatted input functions from module Scanf and to print data with formatted output functions from modules Printf and Format.
Format strings are made of three kinds of entities:
'%' followed by one or more characters specifying what kind of argument to read or print,'@' followed by one or more characters specifying how to read or print the argument,There is an additional lexical rule to escape the special characters '%' and '@' in format strings: if a special character follows a '%' character, it is treated as a plain character. In other words, "%%" is considered as a plain '%' and "%@" as a plain '@'.
For more information about conversion specifications and formatting indications available, read the documentation of modules Scanf, Printf and Format.
Format strings have a general and highly polymorphic type ('a, 'b, 'c, 'd, 'e, 'f) format6. The two simplified types, format and format4 below are included for backward compatibility with earlier releases of OCaml.
The meaning of format string type parameters is as follows:
'a is the type of the parameters of the format for formatted output functions (printf-style functions); 'a is the type of the values read by the format for formatted input functions (scanf-style functions).'b is the type of input source for formatted input functions and the type of output target for formatted output functions. For printf-style functions from module Printf, 'b is typically out_channel; for printf-style functions from module Format, 'b is typically Format.formatter; for scanf-style functions from module Scanf, 'b is typically Scanf.Scanning.in_channel.Type argument 'b is also the type of the first argument given to user's defined printing functions for %a and %t conversions, and user's defined reading functions for %r conversion.
'c is the type of the result of the %a and %t printing functions, and also the type of the argument transmitted to the first argument of kprintf-style functions or to the kscanf-style functions.'d is the type of parameters for the scanf-style functions.'e is the type of the receiver function for the scanf-style functions.'f is the final result type of a formatted input/output function invocation: for the printf-style functions, it is typically unit; for the scanf-style functions, it is typically the result type of the receiver function.type ('a, 'b, 'c, 'd, 'e, 'f) format6 =
('a, 'b, 'c, 'd, 'e, 'f) CamlinternalFormatBasics.format6Converts a format string into a string.
format_of_string s returns a format string read from the string literal s. Note: format_of_string can not convert a string argument that is not a literal. If you need this functionality, use the more general Scanf.format_from_string function.
val (^^) :
('a, 'b, 'c, 'd, 'e, 'f) format6 ->
('f, 'b, 'c, 'e, 'g, 'h) format6 ->
('a, 'b, 'c, 'd, 'g, 'h) format6f1 ^^ f2 catenates format strings f1 and f2. The result is a format string that behaves as the concatenation of format strings f1 and f2: in case of formatted output, it accepts arguments from f1, then arguments from f2; in case of formatted input, it returns results from f1, then results from f2. Right-associative operator, see Ocaml_operators for more information.
Terminate the process, returning the given status code to the operating system: usually 0 to indicate no errors, and a small positive integer to indicate failure. All open output channels are flushed with flush_all. The callbacks registered with Domain.at_exit are called followed by those registered with Stdlib.at_exit.
An implicit exit 0 is performed each time a program terminates normally. An implicit exit 2 is performed if the program terminates early because of an uncaught exception.
Register the given function to be called at program termination time. The functions registered with at_exit will be called when the program does any of the following:
Stdlib.exitcaml_shutdown. The functions are called in 'last in, first out' order: the function most recently added with at_exit is called first.Array operations.
Byte sequence operations.
Input channels.
List operations.
Extra labeled libraries.
Output channels.
Facilities for printing exceptions and inspecting current call stack.
Strings.